Best Surface to Use For Your Horse Barn

Horse stalls are typically plywood, boards, solid surfaces or rubber mats. The surfaces can be covered with shavings, straw, peat moss or other bedding materials to provide insulation and cushion for the horse’s legs. Other stall flooring includes woodchips or sand. A variety of commercial stall flooring products are available.
Dirt floors or surfaces can also be used.

Wooden stalls provide some insulation, but care must be taken to ensure that the wood is treated with an appropriate preservative against rot and penetration by insects. Composite boards such as plywood covered with asphalt shingles are not acceptable because the shingles are easily dislodged into the horse’s eyes, or the animal may eat them.
The surface must be flat and free of protruding nails, sharp edges or loose boards. Sagging joints should be strengthened to prevent sores on the horse’s legs.


Floors are sometimes covered with brick, concrete or other hard surfaces that allow the horse to better grip when walking. The horse may prefer a textured surface such as brick or paving brick because the slightly rough texture helps prevent slipping.


Plywood should never be used for stall floors because it is too flexible, and horses paw at it, leading to sores on their legs.

Stalls should be well ventilated and at a temperature appropriate for the horse’s comfort. The goal is not to keep the air dry or too warm, but to keep it from getting too damp or too hot.


In frigid climates, heat lamps may be used to maintain a comfortable stall temperature.


In sweltering weather, evaporation from wet bedding usually cools the stall sufficiently.


However, if a horse’s coat is sweaty, use fans and evaporative cooling to dry the animal quickly.


Be sure that fans do not produce blowing dust or particles that irritate the horse’s eyes, nose or respiratory tract.


There are many ways to keep horses other than in an enclosed barn. However, if you plan to have horses inside the barn, you must consider the safety of your animals. It would be best if you never built a floor made of wood because they are not strong enough to support the weight of horses. Concrete or brick are the best materials to use because they can handle the animals’ weight.


Wooden floors become worn out quickly, so consider using brick for your barn floor.? You also have to put in some sand or footing, usually brick dust, sand, or gravel. A brick floor is effortless to clean, and you can always cover up any brick that is chipped or broken with brick dust. When brick wears down, take a brick from the other side of the barn and replace it.? This makes doing repairs quick and simple.


Also, brick works very well as a base for a stall mat. You consider that brick, brick dust, sand, gravel, or wood should never be used for the stall mats because horses can rip them up. A horse’s feet are susceptible and should only be on rubber mats.


Brick is not the only material you can use for your barn floor. You can also have concrete. If you would like the barn to be heated, brick makes an excellent base for that. You can put brick on your concrete floor and build brick walls around your stall mats.


When it comes time to make repairs, brick is elementary because you can replace individual brick. However, if you will use brick as a base for your stall mats, you might use rebar to secure the brick. You can use steel tie wire to attach brick onto concrete.


When it comes time to replace brick on top of your stall mats, it is essential that the bottom of the brick be even or else it will cause problems with your horse’s feet. If the brick is not even, then you might find that your horse will rub up against it and chip off pieces.


If you plan on having a brick floor, put in some footing to keep brick dust from mixing with the mud and dirt. You can use brick dust, sand, or gravel as a footing. All you have to do is lay brick dust, sand, or gravel down on the stall mats and then put brick. This will prevent horses from eating brick dust, allow for good drainage, so your horses’ feet stay dry, and it also has a pleasant appearance. When brick wears down, you can replace them with new brick. For Horse Barn surfacing, the go-to experts are El Paso Masonry Pro in Texas. They have a long, rich history working with ranchers throughout the great state of Texas on precisely the suitable surface to use for the interior and exterior of horse barns.

Related Post